peek 30 glass filled data sheet

PEEK 30% Glass Filled Data Sheet Essentials

Welcome to our comprehensive guide on PEEK 30% glass filled, a high-performance reinforced resin that is known for its exceptional properties. In this article, we will delve into the key specifications, properties, and material characteristics that make PEEK 30% glass filled an ideal choice for a wide range of applications.

PEEK 30% glass filled offers superior chemical and hydrolysis resistance, making it suitable for environments that demand resistance against harsh chemicals and extreme conditions. Unlike PPS, PEEK 30% glass filled can operate at higher temperatures, which makes it a preferred choice for high-temperature applications.

With a density of 0.056 lb/in³ (1.54 g/cm³) and a low water absorption rate of 0.10% after 24 hours, PEEK 30% glass filled exhibits excellent dimensional stability. Its mechanical properties include a tensile strength of 15,000 psi, a tensile modulus of 900,000 psi, and excellent flexural, compressive, and shear strength.

Thermally, PEEK 30% glass filled boasts a coefficient of linear thermal expansion, heat deflection temperature, and thermal conductivity that contribute to its high-temperature performance. Electrically, it exhibits impressive dielectric properties, making it an excellent electrical insulator.

Throughout this article, we will provide detailed information on the physical, mechanical, thermal, electrical, and other properties of PEEK 30% glass filled, enabling you to make informed decisions for your specific application requirements.

Physical Properties of PEEK 30% Glass Filled

PEEK 30% glass filled is a versatile material with exceptional physical properties, making it ideal for various applications. Its unique combination of strength, stability, and resistance sets it apart from other materials.

Density and Water Absorption

With a density of 0.056 lb/in³ (1.54 g/cm³), PEEK 30% glass filled offers a lightweight solution without compromising on performance. Its low water absorption rate of 0.10% after 24 hours ensures dimensional stability over time, making it suitable for applications exposed to moisture.

Melting Temperature and Thermal Expansion

PEEK 30% glass filled has a high melting temperature of 633°F, allowing it to withstand extreme heat without compromising its structural integrity. Additionally, its coefficient of linear thermal expansion of 30 x 10-5 in./in./°F minimizes the risk of warping or distortion under fluctuating temperatures, ensuring consistent performance.

Deflection Temperature and Maximum Service Temperature

The material has a deflection temperature of 600°F at 264 psi, offering excellent heat resistance. It also has a maximum allowable service temperature in air of 500°F, making it suitable for high-temperature applications.

Flame Retardancy

PEEK 30% glass filled exhibits excellent flame retardancy, achieving a flammability rating of V-0 according to UL94 standards. This makes it a safe and reliable choice for applications where fire safety is crucial.

Electrical Properties

From an electrical standpoint, PEEK 30% glass filled delivers exceptional performance. It has a volume resistance of 1.0 x 1016 Ohm.cm and a surface resistivity of 1.0 x 1016 Ohm/square, ensuring effective electrical insulation in various applications.

peek 30 glass filled material

Physical Property Value
Density 0.056 lb/in³ (1.54 g/cm³)
Water Absorption Rate 0.10% after 24 hours
Melting Temperature 633°F
Thermal Expansion Coefficient 30 x 10-5 in./in./°F
Deflection Temperature 600°F at 264 psi
Maximum Service Temperature (Air) 500°F
Flammability Rating (UL94) V-0
Volume Resistance 1.0 x 1016 Ohm.cm
Surface Resistivity 1.0 x 1016 Ohm/square

Mechanical Properties of PEEK 30% Glass Filled

PEEK 30% glass filled is renowned for its exceptional mechanical properties, making it a top choice for a wide array of applications. Its impressive strength and resilience make it a popular material in industries where durability and performance are critical.

Tensile Strength

Tensile strength refers to the maximum amount of pulling force a material can withstand before breaking. PEEK 30% glass filled boasts a remarkable tensile strength of 15,000 psi, highlighting its ability to endure substantial forces without compromising its integrity.

Tensile Modulus

The tensile modulus, also known as Young’s modulus, measures a material’s resistance to deformation under tension. With a commendable tensile modulus of 1,000,000 psi, PEEK 30% glass filled displays exceptional rigidity and resilience when subjected to tensile forces.

Flexural Strength

PEEK 30% glass filled demonstrates impressive flexural strength, enabling it to withstand bending forces without experiencing permanent deformation. Its flexural strength is measured at 24,000 psi, making it a robust and reliable option for applications that require resistance to bending stresses.

Compression Strength

This material exhibits excellent compression strength, allowing it to withstand high-pressure environments. PEEK 30% glass filled can endure pressures of up to 25,000 psi, ensuring its stability and structural integrity in demanding conditions.

Shear Strength

Shear strength refers to a material’s ability to withstand forces that cause internal layers to slide against each other. PEEK 30% glass filled possesses a shear strength of 14,100 psi, making it highly resistant to shear forces and suitable for applications that involve sliding or rubbing motions.

Izod Impact Strength

Izod impact strength measures a material’s ability to absorb energy upon impact. PEEK 30% glass filled has an Izod impact strength of 1.8 ftlbs/in, indicating its capacity to withstand sudden impacts without fracturing or breaking apart.

Rockwell Hardness

Rockwell hardness is a measure of a material’s resistance to indentation or penetration. PEEK 30% glass filled boasts a Rockwell hardness of 103 M Scale, indicating its high level of hardness and durability.

Coefficients of Friction

PEEK 30% glass filled is known for its low coefficients of friction, which highlight its excellent lubricity and surface characteristics. At a temperature of 68°F, this material exhibits a static friction coefficient of 0.28 and a dynamic friction coefficient of 0.30, offering smooth and efficient movement in applications requiring reduced friction.

peek 30 glass filled mechanical properties

Property Value
Tensile Strength 15,000 psi
Tensile Modulus 1,000,000 psi
Flexural Strength 24,000 psi
Compression Strength 25,000 psi
Shear Strength 14,100 psi
Izod Impact Strength 1.8 ftlbs/in
Rockwell Hardness 103 M Scale
Coefficients of Friction (Static) 0.28
Coefficients of Friction (Dynamic) 0.30

Thermal Properties of PEEK 30% Glass Filled

PEEK 30% glass filled is a high-performance material renowned for its exceptional thermal properties, making it an excellent choice for applications that require resistance to high temperatures. Its thermal conductivity of 2.98 BTU-in/ft²-hr-°F allows efficient heat dissipation, ensuring dimensional stability even in extreme heat conditions. Let’s take a closer look at some of its key thermal properties:

  • Coefficient of Linear Thermal Expansion: With a coefficient of linear thermal expansion of 30 x 10-5 in./in./°F, PEEK 30% glass filled exhibits excellent dimensional stability across a wide temperature range. This property minimizes the risk of warping or distortion under fluctuating temperatures.
  • Heat Deflection Temperature: The material maintains its structural integrity even when exposed to elevated temperatures. It has a heat deflection temperature of 600°F at 264 psi, ensuring reliable performance in high-temperature applications.
  • Melting Temperature and Maximum Operating Temperature: PEEK 30% glass filled has a melting temperature of 644°F, allowing it to withstand extreme heat without compromising its properties. Its maximum operating temperature is 480°F, providing a wide temperature range for various applications.

To give you a visual representation of PEEK 30% glass filled’s thermal properties, refer to the table below:

Property Value
Coefficient of Linear Thermal Expansion 30 x 10-5 in./in./°F
Heat Deflection Temperature (264 psi) 600°F
Melting Temperature 644°F
Maximum Operating Temperature 480°F

Image:

Electrical Properties of PEEK 30% Glass Filled

PEEK 30% glass filled is a high-performance material that offers excellent electrical insulation properties, making it highly suitable for various electrical applications. Its unique combination of mechanical and thermal properties, combined with its exceptional electrical characteristics, sets it apart as a top choice for demanding industries.

Some of the key electrical properties of PEEK 30% glass filled include:

Property Value
Dielectric Strength 500 V/mil
Dielectric Constant 3.2 (at 1 kHz)
Dissipation Factor 0.005 (at 1 MHz)
Volume Resistivity 1.0 x 1016 Ohm.cm (at 73°F)
Surface Resistivity 1.0 x 1016 Ohm/square

These properties ensure efficient electrical insulation and enable PEEK 30% glass filled to withstand high voltage and high-frequency applications. The material’s excellent dielectric strength and low dissipation factor contribute to low energy loss and reliable electrical performance.

When it comes to electrical applications, PEEK 30% glass filled provides the necessary electrical insulation and reliability, making it a standout choice for industries such as electronics, automotive, aerospace, and more.

peek 30 glass filled electrical properties

Superior Dielectric Strength

The dielectric strength of PEEK 30% glass filled is 500 V/mil, ensuring efficient electrical insulation and the ability to withstand high voltage without electrical breakdown. This property makes it an excellent material for applications where electrical insulation is critical.

Low Dissipation Factor

The low dissipation factor of 0.005 at 1 MHz indicates minimal energy loss in high-frequency applications. This characteristic is essential for preserving signal integrity and maximizing electrical efficiency.

High Volume Resistivity

PEEK 30% glass filled exhibits a volume resistivity of 1.0 x 1016 Ohm.cm at 73°F, indicating excellent resistance to the flow of electric current. This property ensures reliable electrical insulation, reducing the risk of electrical leakage in critical applications.

Stable Surface Resistivity

The surface resistivity of 1.0 x 1016 Ohm/square allows PEEK 30% glass filled to maintain its electrical insulation properties on the surface, providing consistent performance and minimizing the risk of surface conductivity in electrical applications.

Overall, the exceptional electrical properties of PEEK 30% glass filled, combined with its mechanical strength and thermal stability, make it an ideal material for various electrical applications, ensuring reliable performance and long-term durability.

Other Properties of PEEK 30% Glass Filled

In addition to its physical, mechanical, thermal, and electrical properties, PEEK 30% glass filled exhibits other noteworthy characteristics that enhance its versatility and applicability in various industries.

Grades of PEEK 30% Glass Filled

Grade Properties
100% PEEK Enhanced toughness and impact resistance
30% carbon fiber + 70% PEEK High rigidity and creep strength
10% carbon fiber + 10% PTFE + 10% graphite + 70% PEEK Excellent sliding and abrasion resistance, high dimensional stability

PEEK 30% glass filled is available in different grades, allowing engineers and designers to choose the most suitable option based on their specific application requirements. Each grade offers unique properties that cater to different needs, such as enhanced toughness, impact resistance, high rigidity, creep strength, excellent sliding and abrasion resistance, and high dimensional stability.

Various Sizes of PEEK 30% Glass Filled Sheets

PEEK 30% glass filled sheets are available in different sizes, ensuring compatibility with various application requirements. Whether small or large, the availability of different sheet sizes allows for greater flexibility and ease of use in different projects.

peek 30 glass filled properties

Conclusion

PEEK 30% glass filled is a remarkable material that offers a wide range of exceptional properties, making it highly desirable for demanding applications. Its high-performance characteristics, including outstanding high temperature resistance, chemical resistance, and excellent mechanical and electrical properties, make it suitable for a variety of industries.

One of the key advantages of PEEK 30% glass filled is its exceptional dimensional stability, ensuring that it maintains its shape and performance even in challenging conditions. Additionally, it exhibits remarkable wear resistance and low friction properties, making it an ideal choice for applications where reliability and longevity are crucial.

The cost-effectiveness of PEEK 30% glass filled, combined with its availability in different grades and sizes, further enhances its versatility. This allows engineers and designers to select the most suitable variant for their specific application requirements. For in-depth information on its properties, the PEEK 30% glass filled datasheet PDF provides a comprehensive resource for making informed decisions in engineering and design.

With its impressive combination of properties and wide applicability, PEEK 30% glass filled is undoubtedly a material that stands out in the field of high-performance engineering plastics. Its exceptional performance in harsh environments and its ability to meet demanding requirements make it a top choice for various industries in Singapore and beyond.

FAQ

What is PEEK 30% glass filled?

PEEK 30% glass filled is a high-performance reinforced resin known for its exceptional properties.

What are the physical properties of PEEK 30% glass filled?

PEEK 30% glass filled has a density of 0.056 lb/in³ (1.54 g/cm³) and exhibits a low water absorption of 0.10% after 24 hours.

What are the mechanical properties of PEEK 30% glass filled?

PEEK 30% glass filled has a tensile strength of 15,000 psi, a tensile modulus of 900,000 psi, excellent flexural strength and modulus, and good compressive strength and modulus.

What are the thermal properties of PEEK 30% glass filled?

PEEK 30% glass filled has a coefficient of linear thermal expansion of 1.2 x 10-5 in./in./°F, a heat deflection temperature of 600°F at 264 psi, and a thermal conductivity of 2.98 BTU-in/ft²-hr-°F.

What are the electrical properties of PEEK 30% glass filled?

PEEK 30% glass filled has a dielectric strength of 500 V/mil, a dielectric constant of 3.70 at 1 MHz, and a volume resistivity of 5 x 10^16 Ohm-cm at 50% RH.

What other properties does PEEK 30% glass filled have?

PEEK 30% glass filled is available in various grades, offers enhanced toughness and impact resistance, high rigidity and creep strength, excellent sliding and abrasion resistance, and high dimensional stability.

Where can I find the PEEK 30% glass filled datasheet?

The PEEK 30% glass filled datasheet provides detailed information on its properties, enabling engineers and designers to make informed decisions for their applications.

Leave a Comment

Your email address will not be published. Required fields are marked *